ARBAY2-145N/PIR/E2/8C

ARBAY2-145N/PIR/E2/8C

RAB Lighting

$490.00
(No reviews yet) Write a Review
SKU:
ARBAY2-145N/PIR/E2/8C
Availability:
Usually ships within 1 week.
Weight:
12.80 LBS
Shipping:
Calculated at Checkout
Spec Sheet:
Spec Sheet
Instructions:
Instructions
Watts:
145W
Color Temp:
4000K (Neutral)
Lumens:
20,642 lm
Efficacy:
142.6
Color Accuracy:
84 CRI
L70:
100,000 Hours
Type:
Constant Current
V120:
1.22A
V208:
0.71A
V240:
0.62A
V277:
0.53A
Input Watts:
144.8W
Spec Sheet:
Spec Sheet
Instructions:
Instructions
Watts:
145W
Color Temp:
4000K (Neutral)
Lumens:
20,642 lm
Efficacy:
142.6
Color Accuracy:
84 CRI
L70:
100,000 Hours
Type:
Constant Current
V120:
1.22A
V208:
0.71A
V240:
0.62A
V277:
0.53A
Input Watts:
144.8W
Adding to cart… The item has been added
Compliance
UL ListedSuitable for damp locations
IESNA LM-79 & LM-80 TestingRAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
DLC ListedThis product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: PFBXC1BG
Performance
Lifespan100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
LED Characteristics
LEDsMulti-chip, high-output, long-life LEDs
Color UniformityRAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Construction
Operating Temperature-20°C (-4°F) to 50°C (122°F)
Housing22 gauge die formed with white powder coat finish. Y Hooks included for easy chain or cable mounting.
ReflectorWhite painted, reflective, die formed painted steel
LensPolycarbonate lens
Cord & Plug8 ft cord and no plug for 120-277V and 480V
FinishOur environmentally friendly polyester powder coatings are formulated for high-durability and long-lasting color
Green TechnologyMercury and UV free. RoHS-compliant components.
Electrical
DriverClass 2, Constant Current, 120-277V, 50/60 Hz, 120V: 1.22A, 208V: 0.71A, 240V: 0.62A, 277V: 0.53A
THD3.95% at 120V, 6.75% at 277V
Power Factor99.9% at 120V, 96.9% at 277V
Battery BackupBattery backup will operate the fixture for 90 minutes if power fails. Wired for 120-277V.
Battery Backup Light Loss Factor0.175
Surge Protection2.5kVFor areas prone to surges, upgrade to 10kV surge protection available
Installation
MountingV hooks and optional pendant mounting. AEROBAY® comes with two 42" chains.
Sensor Settings
Passive Infrared Occupancy and Daylight SensorPIR sensor with IR remote capability. High/Low bay passive infrared occupancy and daylight sensor.
UL ListedIndoor use only
Operating Temperature32°F to 158°F (0°C to 70°C)
Operating Humidity5% to 96%, noncondensing
Line VoltageLineVage for direct connection to load
Voltage120, 277, 347V, 60Hz or 230V, single phase, 50Hz operation
Power Consumption0.2W
Maximum VersatilityAdjustable time delay and sensitivityAdjustable hold-off daylighting level
Weight6.4 oz (181 g)
HardwareUL listed snap-in mounting hardware
MountingEasy mounting using knockout at end of linear high bay luminaire
LensLens (attached) designed for mounting heights from 15 to 40 ft
Rotatable MaskSnap-on rotatable mask for aisleway applications (included)
CoverageCovers a 100-foot diameter area whem mounted at height of 40 ft
Factory Default15 minutes time delayMax sensitivity300 footcandle light level
Handheld Wireless Configuration ToolAdjust settings using handheld wireless configuration tool (catalog# WSREM). Only available with 0-10V dimming driver options. Handheld wireless configuration tool available here.

Reviews

!