| Compliance |
| UL Listed | Suitable for wet locations |
| IESNA LM-79 & LM-80 Testing | RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80. |
| IP Rating | Ingress protection rating of IP65 for dust and water |
| DLC Listed | This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: S-ML9KBD (Outdoor Pole/Arm-Mounted Area and Roadway Luminaires)S-S0QCKY (Architectural Flood and Spot Luminaires) |
| Electrical |
| Driver | 70W: Constant Current, Class 1, 120-277V, 50/60 Hz, 120V: 0.58A, 208V: 0.33A, 240V: 0.30A, 277V: 0.27A
60W: Constant Current, Class 1, 120-277V, 50/60 Hz, 120V: 0.49A, 208V: 0.28A, 240V: 0.26A, 277V: 0.23A
50W: Constant Current, Class 1, 120-277V, 50/60 Hz, 120V: 0.41A, 208V: 0.24A, 240V: 0.21A, 277V: 0.19A |
| Dimming Driver | Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%. |
| THD | 13.33% at 120V |
| Power Factor | 99.91% at 120V, 91.9% at 277V |
| Surge Protection | 6kV |
| Performance |
| Lifespan | 100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations |
| Construction |
| IES Classification | The Type IV distribution (also known as a Forward Throw) is especially suited for mounting on the sides of buildings and walls, and for illuminating the perimeter of parking areas. It produces a semicircular distribution with essentially the same candlepower at lateral angles from 90° to 270°. |
| Cold Weather Starting | The minimum starting temperature is -40°C (-40°F) |
| Maximum Ambient Temperature | Suitable for use in up to 40°C (104°F) |
| Lens | Polycarbonate lens |
| Housing | Die-cast aluminum housing, lens frame and mounting arm |
| Vibration Rating | 3G vibration rating per ANSI C136.31 |
| Effective Projected Area (Without Shield) | 1 Fixture: 0.60 ft²
2 Fixtures at 90°: 0.86 ft²
2 Fixtures at 180°: 1.21 ft²
3 Fixtures at 90°: 1.47 ft²
4 Fixtures at 90°: 1.47 ft² |
| Effective Projected Area (With Shield) | 1 Fixture: 0.64 ft²
2 Fixtures at 90°: 1.14 ft²
2 Fixtures at 180°: 1.28 ft²
3 Fixtures at 90°: 1.8 ft²
4 Fixtures at 90°: 1.8 ft² |
| Finish | Formulated for high durability and long-lasting color |
| Green Technology | Mercury and UV free. RoHS-compliant components. |
| LED Characteristics |
| LEDs | Long-life, high-efficiency, surface-mount LEDs |
| Color Uniformity | RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017. |
| Installation |
| Mounting | Universal mounting arm compatible for hole spacing patterns from 1" to 5 1/2" center to center. Round Pole Adaptor plate included as a standard. Easy slide and lock to mount fixture with ease. Round pole diameter must be >4" to mount fixtures at 90° orientation. |
| Optical |
| BUG Rating | B3 U0 G3 |
| Sensor Settings |
| Capacitance Load | 400VA at 120VAC, 800VA at 230VAC, 1000VA at 277VAC |
| Operating Temperature | -20°C to +60°C (-4°F to +140°F) |
| Relay | Zero-cross relay |
| Maximum Mounting Height | 49.2 ft (15M) |
| Customizable Detection Area | 10, 50, 75 or 100% |
| Time Delay | 5s, 30s, 1min, 5min, 10min, 20min, 30min |
| Cut Off Period | 0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level |
| Cut-Off Dimming level | 10, 20, 30, 50% |
| Cut-Off Power | Less than 1W |
| Daylight Threshold | About .2-5 fc for disabled |
| Sensor Principle | High Frequency |
| Microwave Frequency | 5.8GHz +/- 75MHz |
| Microwave Power | <0.2mW |
| Max Detection Range | 26 ft diameter at 16 ft mounting height |
| Detection Angle | About 30 to 150 degrees |
| Remote Control Accessory | Adjust settings using remote control (catalog# MSR1). Only available with 0-10V dimming driver options. Remote control available here. |
