RAB Lighting A17-3T150SF/MVS Area Light A17 TYPE 3 150W LED 120-277V Slipfitter MV SENS BZ

Description

Compliance
UL Listed	Suitable for wet locations
IESNA LM-79 & LM-80 Testing	RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
IP Rating	Ingress protection rating of IP65 for dust and water
DLC Listed	This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. Designed to meet DLC 5.1 requirements.DLC Product Code: S-G40T53 (Outdoor Pole/Arm-Mounted Area and Roadway Luminaires)S-DXL61C (Architectural Flood and Spot Luminaires)
Electrical
Driver	150W: Constant Current, Class 1, 120-277V, 50/60 Hz, 120V: 1.21A, 208V: 0.70A, 240V: 0.63A, 277V: 0.53A 120W: Constant Current, Class 1, 120-277V, 50/60 Hz, 120V: 0.97A, 208V: 0.56A, 240V: 0.51A, 277V: 0.45A 100W: Constant Current, Class 1, 120-277V, 50/60 Hz, 120V: 0.81A, 208V: 0.47A, 240V: 0.42A, 277V: 0.38A
Dimming Driver	Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
THD	3.01% at 120V, 5.56% at 277V
Power Factor	99.9% at 120V, 96.2% at 277V
Surge Protection	6kV
Performance
Lifespan	100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
Construction
IES Classification	The Type III distribution is ideal for roadway, general parking and other area lighting applications where a larger pool of lighting is required. It is intended to be located near the side of the area, allowing the light to project outward and fill the area.
Cold Weather Starting	The minimum starting temperature is -40°C (-40°F)
Maximum Ambient Temperature	Suitable for use in up to 40°C (104°F)
Lens	Polycarbonate lens
Housing	Die-cast aluminum housing, lens frame and mounting arm
Vibration Rating	3G vibration rating per ANSI C136.31
EPA	1 Fixture: 0.662 Fixtures at 90°: 0.802 Fixtures at 180°: 1.323 Fixtures at 90°: 1.324 Fixtures at 90°: 1.32
Finish	Formulated for high durability and long-lasting color
Green Technology	Mercury and UV free. RoHS-compliant components.
LED Characteristics
LEDs	Long-life, high-efficiency, surface-mount LEDs
Color Uniformity	RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
Installation
Mounting	Slipfitter with 180° pivot available for mounting on 2 3/8" tenon
Optical
BUG Rating	B4 U0 G4
Sensor Settings
Capacitance Load	400VA at 120VAC, 800VA at 230VAC, 1000VA at 277VAC
Operating Temperature	-20°C to +60°C (-4°F to +140°F)
Relay	Zero-cross relay
Maximum Mounting Height	49.2 ft (15M)
Customizable Detection Area	10, 50, 75 or 100%
Time Delay	5s, 30s, 1min, 5min, 10min, 20min, 30min
Cut Off Period	0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level
Cut-Off Dimming level	10, 20, 30, 50%
Cut-Off Power	Less than 1W
Daylight Threshold	About .2-5 fc for disabled
Sensor Principle	High Frequency
Microwave Frequency	5.8GHz +/- 75MHz
Microwave Power	<0.2mW
Max Detection Range	26 ft diameter at 16 ft mounting height
Detection Angle	About 30 to 150 degrees
Remote Control Accessory	Adjust settings using remote control (catalog# MSR1). Only available with 0-10V dimming driver options. Remote control available here.

A17-3T150SF/MVS

Write a Review

RAB Lighting

A17-3T150SF/MVS

Reviews

Get pricing for