- Power 17W
- Open Plenum Rated
- Type IC Rated Ð Approved for Direct Contact with Insulation
- Air-Tight, Wet Location, Insulated and Non Insulated Ceilings
- Light colors: 2700K, 3000K & 4000K
- Superb Light Quality with CRI 90+
- Triac Dimmable with most CL dimmers 120V input
- 0-10V Dimmable Option 120V Ð 347V input
- External Driver Inside Connection Box Ð No Junction Box Needed
- Warranty: 10 Year on Residential, 5 Year on Commercial Installations
- cULus Listed, Energy StarÊand T24 Certified
Video Overview
Discover 2nd Generation Regressed LED Lighting Fixtures
Technical Specifications
CONSTRUCTION:
6_ Round Regressed LED fixtures with integral LEDs and built-in driver.
Open Plenum Rated Commercial Grade Quality With Architectural Design.
MOUNTING:
Cut Hole In Ceiling And Snap Fixture In Opening With Attached Spring Clips.
2 1/4_ Above Ceiling Clearance Required. Quick connectors Included.
- Default Input Voltage: 120V AC Triac Dimmable
- Optional Driver Input Voltage: 120V-347V AC 0-10V Dimmable
- Power factor: > 0.99
- Energy Used: 17W
- Halogen equivalent: 100W
- Beam Angle: 95¡
- Light colour options: Warm White 2700K, Soft White 3000K and Neutral White 4000K
- Light output: Warm White 1150 lm, Soft White 1200 lm and Neutral White 1300 lm
- CRI > 90
- Ambient Operating Temperature: -40¡F (-40¡C) to +104¡F (+40¡C)
- Compliance: cULus Listed
- Rated: Type IC (Direct Contact with Insulation), Energy Star, Air-Tight, T24
DIMENSIONS:
- OD 7_ (178 mm); ID 6_ (152 mm); Thickness 2 1/4_ (56 mm)
- Cut out: 6_ to 6 1/4_
Suitable for Wet Locations, Insulated Ceilings & Open Plenum installations.
Installation
ALL FIXTURES MUST BE INSTALLED IN ACCORDANCE WITH CURRENT APPLICABLE ELECTRICAL CODES.
Regressed LED Lights Installation:
CONNECTING THE FIXTURE:
Open the cover of the junction box. Push and remove one of the half-inch knockouts. Install standard L16 cable connector. Use double connector for daisy chaining fixtures. Insert line voltage feed into the cable connector and splice same colour wires using the included quick connectors. Close the cover.
DIMMING:
We recommend LED/CFL dimmers that have a low range adjustment dial. After all fixtures are connected to the dimmer adjust the dial to the lowest position before the lights start to flicker of shut down. This setting depends on the local voltage and number of fixtures per dimmer.
WARNING:
DO NOT OPEN THE LIGHT FIXTURE Ð NO SERVICEABLE PARTS INSIDE.
Trim Color Options
Available in White and Black Trims
Downloads
CONSTRUCTION:
6_ Round Regressed LED fixtures with integral LEDs and built-in driver.
Open Plenum Rated Commercial Grade Quality With Architectural Design.
MOUNTING:
Cut Hole In Ceiling And Snap Fixture In Opening With Attached Spring Clips.
2 1/4_ Above Ceiling Clearance Required. Quick connectors Included.
- Default Input Voltage: 120V AC Triac Dimmable
- Optional Driver Input Voltage: 120V-347V AC 0-10V Dimmable
- Power factor: > 0.99
- Energy Used: 17W
- Halogen equivalent: 100W
- Beam Angle: 95¡
- Light colour options: Warm White 2700K, Soft White 3000K and Neutral White 4000K
- Light output: Warm White 1150 lm, Soft White 1200 lm and Neutral White 1300 lm
- CRI > 90
- Ambient Operating Temperature: -40¡F (-40¡C) to +104¡F (+40¡C)
- Compliance: cULus Listed
- Rated: Type IC (Direct Contact with Insulation), Energy Star, Air-Tight, T24
DIMENSIONS:
- OD 7_ (178 mm); ID 6_ (152 mm); Thickness 2 1/4_ (56 mm)
- Cut out: 6_ to 6 1/4_
Suitable for Wet Locations, Insulated Ceilings & Open Plenum installations.
Discover 2nd Generation Regressed LED Lighting Fixtures
Specification Sheet
Spec Sheet LL6RR
pdf files
LL6RR-27K | LL6RR-30K | LL6RR-40K
ALL FIXTURES MUST BE INSTALLED IN ACCORDANCE WITH CURRENT APPLICABLE ELECTRICAL CODES.
Regressed LED Lights Installation:
CONNECTING THE FIXTURE:
Open the cover of the junction box. Push and remove one of the half-inch knockouts. Install standard L16 cable connector. Use double connector for daisy chaining fixtures. Insert line voltage feed into the cable connector and splice same colour wires using the included quick connectors. Close the cover.
DIMMING:
We recommend LED/CFL dimmers that have a low range adjustment dial. After all fixtures are connected to the dimmer adjust the dial to the lowest position before the lights start to flicker of shut down. This setting depends on the local voltage and number of fixtures per dimmer.
WARNING:
DO NOT OPEN THE LIGHT FIXTURE Ð NO SERVICEABLE PARTS INSIDE.
