Description

Downloads:

9” Architectural frame-in kits combined with LED module and integral reflector. This is designed for use in non-insulated ceiling. Insulation material must be kept a minimum of 3” from fixture. Provided in high efficacy LED with dimmable driver and the special optical diffusion allows high lumen transmission and light uniformity.

DLED-AFK9 Features

Mounting Ring

20-gauge CRS mounting ring, black-painted. 1-5/8” deep collar may use for various thickness of ceiling materials.

LED module & Trim

Aluminum extruded Heat sink designed to facilitate heat dissipation to reduce LED junction temperature for maintaining constant light output, color and life of solid state components
Module construction includes LED, heat sink and lens.
Heavy gauge aluminum reflector anodized in clear, haze, gold, champagne and pewter color finish. Reflectors may provide with black and white milled groove baffle collar.

Junction Box

Listed for through branch circuit wiring.(Max.8 No 12 AWG 90 degrees C branch circuit conductors. (4 in, 4 out)
(5)1/2” knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
Ground wire provided on J-box.

Mounting Channel Bracket

Commercial mounting kit provided up to 5” vertical adjustment, which accommodates 1/2” EMT conduit, optional HB-24 or HBC-24 bar hanger or lathing channels for T-bar grid or concealed spline ceiling.

LED POWER SUPPLY

10-100% dimmable for 120V electronic low voltage dimmer switches.
Driver feature power factor >.90, THD <20% and has integral thermal protection to sense over temperature or internal failure.
Driver mounts externally to the module, allowing future replacement, if needed.

Warranty