Larson Electronics *RENTAL* Battery Powered LED Light Plant - 30' Telescoping Tower - 4 LED Fixtures - 10 Hour Runtime

*This unit is for rentals. Please scroll down for rental rates* The RNT-WCBP-8X6V-4XLED battery powered mobile light tower from Larson Electronics is a towable lighting package powered by eight rechargeable 6 Volt batteries. With four 270 watt LED lamps producing 97,200 lumens this unit will illuminate a 4-6 acre area continuously without recharging for up to 10 hours. The RNT-WCBP-8X6V-4XLED mobile light tower is a self contained towable light tower package that produces enough light to illuminate an area up to 6 acres in size. This unit contains eight 6 Volt DC sealed lead acid batteries, which supplies the current to four 300 watt LED lamps producing 24,300 lumens each for a combined total of 97,200 lumens of light. This unit can run uninterrupted for 10 hours straight without recharging and includes a telescoping light mast which can elevate the four LED lamps to a height of 30 feet. This mobile floodlight package is ideal for emergency services, large scale event illumination, construction, mining, industrial operations and anywhere an extended operation capable mobile lighting solution is needed. The RNT-WCBP-8X6V-4XLED mobile light tower incorporates a long list of impressive features. With a rechargeable battery bank, this LED light plant requires no fuel, produces zero emissions, and runs silently. The LED light heads are independently adjustable without tooling. These high output LED heads provide instant on operation, have a 50,000 hour lamp life, and are resistant to heat, impacts, vibration, making it ideal for remote industrial and construction sites. Click Image to Enlarge Click Image to Enlarge Lights: The lighting system on this unit is comprised of four 270 watt LED lamps producing 24,300 lumens of light each attached to the end of the telescoping light boom. These floodlights produce a wide flood light pattern capable of illuminating a minimum of 4 acres with a combined total of 97,200 lumens of light. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. The lamps are connected to the power source via a water tight male pin connector that attaches to a receptacle located on the end of the telescoping boom. Durability: As well as unparalleled heat control, our LED lights also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE LEDs help these units achieve 15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Telescoping Boom: The telescoping boom consists of three sections extending up to 30 feet through the use of two manual self braking winches and allows for rotating the lights 360 degrees. One winch is mounted to the trailer tongue and acts to raise the tower into a vertical position while the other is mounted to the boom and is used to extend the tower to the desired height. The telescoping boom is constructed of galvanized steel to resist rusting and corrosion and is capable of withstanding 65 mph winds when extended to its full height and the stabilizing outriggers are deployed. The stabilizing outriggers are a three point design with one located under the trailer tongue and two on the rear sides of the unit. The two rear outriggers are adjustable and include 1,000 lbs swivel jacks for leveling and stabilizing the tower. Housing: All of the operating components are housed within a protective compartment constructed of 14 gauge steel and designed to provide airflow for cooling. Side doors provide access to the interior while latches provide secure closing while the unit is in use. The design and construction of this unit provides silent operation and zero emissions. The entire unit can be loaded and unloaded onto trucks via forklift sleeves mounted to the outer section of the light mast. The entire unit is mounted onto a two wheel trailer with a 3,500 lbs leaf spring axle with 15" wheels. A standard two inch ball coupling and two standard safety chains allow for easy hookup and towing. Specifications / Additional Information RNT-WCBP-8X6V-4XLED Rechargeable Mobile Light Tower Protection Power: Battery Powered External Grounding Battery Bank: (8) 6V sealed lead acid batteries Individual Light Switch Circuit Breakers Lamps: 4- 270 watt LED lamps Three Point Outrigger System Total Lamp Watts: 1,080 watts Withstands 65Mph Winds at Full Extension Boom Height: Up to 30 Feet Efficiency: 90 Lumens per Watt Total Lumens: 97,200 Coverage: 4 to 6 Acres Special Orders- Requirements Run Time: 10 Hours on Single Charge Contact us for special requirements Noise Level: Silent Toll Free: 888-325-4448 Mounting: Towable Trailer, 3500lbs Axle, 2" Ball Coupling, 15" Wheels Weight: 2,092 lbs E-mail: [email protected] Rental Type: Monthly, Weekly, Daily Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required. Rental prices for the RNT-WCBP-8X6V-4XLED:Monthly...$1395.50 USDWeekly...$896.79 USD Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if needed. Scroll Down to Purchase