Larson Electronics Power Distribution System - 75KVA 3-Phase 480V to 120/208Y - 6 X 480V Breakers/Outlets - 14 X 120/20

MADE IN THE USA This Larson Electronics 75KVA Power Distribution System includes a 600-amp three phase 480 volt main breaker panel on the primary side and a 200-amp, 120/208Y 3-phase main breaker panel on the secondary side. Both panels are rated NEMA 3R. Sixteen 480V, 3-wire, 4-pole receptacles are protected by six 40-amp breakers, four 30-amp breakers, four 100-amp breakers and two 60-amp breakers. A separate 480V, 200-amp disconnect with separate enclosure is included (no associated outlet). The 480V primary panel feeds the 75 KVA 480V to 120/208Y transformer. The NEMA 3R transformer feeds the 200-amp, 120/208Y secondary load center. This 200-amp main breaker panel provides three 60-amp, 125/250V, 3-pole, 4-wire receptacles protected by 60-amp breakers; two 50-amp, 125/250V, 3-pole, 4-wire receptacles (Nema SS2-50R) protected by 50-amp breakers; and six 120V GFCI receptacles protected by 20 amp breakers. Click Photo to Enlarge The transformer is mounted on a 1/8” thick steel plate mounting platform and the load center/distribution assembly is mounted within a 2-inch square carbon steel tubing frame, resulting in an extremely stable and well protected power distribution platform. This model is equipped with four heavy duty polyurethane 8-inch locking casters, skid pockets and a top located lifting eyelet. The entire frame is powder coated. Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to construction sites, plant maintenance, plant turnarounds, hazardous location operations, shows, exhibits, and shipyard operations. These power transformers are popularly used in applications where external power sources are often necessary and work well in combination with explosion proof lights and equipment. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480X17-75K-120X14 Power Distribution Substation Ratings Line In: Three Phase 480 VAC with line-in cable provided by the customer UL 1640 Portable Power-Distribution Equipment Primary Load Center: 600-amp MB – 480V - NEMA 3R – 51 spaces NEMA 3R Indoor or Outdoor Use Primary 480V Receptacles: (3)Hubbell CS8169 50-amp,(3) HBL4100R7 100-amp, (4) Hubbell L16-30R 30-amp, (2) HBL460R7W 60-amp Made in the USA Additional Primary Disconnect: 200A 480V disconnect in separate enclosure Transformer KVA: 75 KVA 480V to 120/208Y NEMA 3R Secondary Load Center: 200-amp MB – 120/208Y – NEMA 3R – 30 spaces Secondary 120/208Y Receptacles: (6) 20-amp 120 Volt GFCI, (2) Hubbell HBLL15-30R 30-amp, (3) Hubbell CS6369 50-amp Frame: Powder coated/painted carbon steel frame with skid pockets, locking casters and top pick-eye Ground: Mechanical Ground Transport: 8" locking polyurethane casters, forklift access and pick eye Special Orders- Requirements Dimensions: W-48" X L-48" X H-55" Contact us for special requirements Weight: ~850lbs Toll Free: 888-325-4448 American Made E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase