Larson Electronics Pneumatic Light Mast w/ CCTV Internal Cable - Extends to 20 Feet - Air Powered Telescoping Boom

The Larson Electronics PLM-18-CCTV-NAC Pneumatic Light Mast provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations up to eighteen feet. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This rugged telescoping pneumatic light tower mast is designed to allow operators to quickly and safely deploy lighting and other electrical equipment in locations where this equipment must be elevated to heights up to 20 feet for effective application. This light boom can be extended to 20 feet for maximum area coverage and collapsed to 8 feet to bring equipment closer to the target area as well as for transport and storage. The tower is constructed of high strength, heat treated aluminum tubing for strength and durability. This tower is comprised of three 6.7` sections, and includes a locking top mounting plate for easy removal of lights or cameras. The mast is elevated using an air compressor, sold separately. An air release valve located at the base of this pneumatic mast allows operators to lower the tower. The 16/7 AWG wiring is internally routed, meaning no loose wiring when the tower is collapsed and no exposed wiring to fray or become damaged. The PLM-18-CCTV-NAC includes an internal wiring harness (2) 1.5sq mm for AC power, (2) 2.5sq mm for DC power, (1) RG59 video cable, and (1) CAT5e cable with 12 inches extending from both ends of the tower. These light masts are typically mounted to trailers or other stable surfaces via an included 12 inch square, _ inch thick mounting base-plate which has been drilled to accept four mounting bolts (3/4 inch). A 24 inch wide and 1/4 inch thick mounting plate is attached to the upper section of the mast to allow operators to easily and securely attach their desired fixtures. This light tower weighs 300 lbs., and can easily support and lift 150 lbs. of lights, cameras, and other electrical equipment. The entire tower assembly is shipped via common freight carrier and when shipped measures approximately 12 feet long, 4 feet wide, 3 feet tall and weighs 350 lbs. Larson Electronics is a manufacturer and as such can custom tailor these units to the customer’s requirements with longer sections and larger mounting plates. Suggested Applications: Lighting and security camera deployment. We can also equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LEDLB-200X2E, LEDLB-160X2E or LEDLB-80x2E. Specifications / Additional Information PLM-18-CCTV-NAC Pneumatic Light Mast Quick Summary Length: 8 feet - 20 feet 8-20 Ft Light Mast Weight: 300 lbs. Aluminum Construction Capacity: 150 lbs. Pneumatic Operation Materials: Aluminum Sections: (3) 6.7` sections Operation: Pneumatic - Electric Air Compressor Special Orders- Requirements Mounting: 1/2" thick, 12 inch Square, Four Hole Bracket Contact us for special requirements Shipping: Common Freight Phone: 1-214-616-6180 Shipping Weight: 350 lbs. Toll Free: 888-325-4448 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements Fax: 1-903-498-3364 Wiring: (3) 1.5sq mm for AC power, (2) 2.5sq mm for DC power, (2) RG6 video cable, (1) CAT5e cable E-mail: [email protected] Down to Purchase-