Larson Electronics Explosion Proof Compact LED Handlamp - Class I, Div. I - 50' SOOW Cord - EXP Plug - 400 Lumens

Made in the USAThe Larson Electronics EPL-FL26-LED-50-1523 Compact Hazardous Location LED Work light is F.M. approved Class 1 Division1 Groups C and D, FM 508 listed, and is ideal for close quarter work and inspection activities in hazardous locations requiring explosion proof protection.This 5 watt explosion proof LED handlamp from Larson Electronics produces 400 lumens of pure LED illumination and comes complete with 50 feet of SOOW cord termintated in an 1523 explosion proof straight blade plug for convenient operation. The EPL-FL26-LED-50-1523 LED drop light`s housing is constructed of non sparking aluminum with molded bumper guards, an annealed glass tube shield and integral lamp shock absorbers. This hazardous location hand lamp is designed to Article 500 of the National Electrical Code and is Class 1, Division 1 and Class 2 Division 1 hazardous location environment approved. This explosion proof LED hand lamp can be installed and used within the hazardous location area making it ideal for hazardous work areas where a ready source of easily managed lighting is desired.This particular unit`s internal LED circuitry automatically senses and adjusts the incoming current to the correct level, allowing the unit to run off a variety of voltages ranging from 120 - 277VAC. The lamp assembly contains 24 individual LED diodes that produce an exceptionally bright output, creating three times as much light as its fluorescent counterparts. The Kelvin temperature color on this unit is 5600K and the rated lifespan of the LEDs lamp assembly is approximately 50,000 hours. EPL-FL26-50 fluorescent hand lamp illuminating a closed warehouse. EPL-FL26-LED-50`s output, more than triple the amount of it`s fluorescent counterpart. This 5 watt LED light is suitable for use in areas where petrochemical vapors and various dusts are present and projects 400 lumens of light, roughly equivalent to a 150 watt incandescent bulb as estimated by Sylvania. This unit is approximately 287% brighter than it`s fluorescent counterpart, nearly tripling the output with use of a low wattage, low amp draw LED light emitter. LED lights are popular in paint prep, painting, and post-paint inspection operations due to the even, pure, white color light produced.Incandescent lights tend to create yellowish, shadowy light that confuses the eye and makes it difficult to examine a work area with consistency. The light output, color, and evenness of coverage make LED lights popular for a wide variety of close quarter work and inspection activities. This unit is rated Class 1, Division 1 and is complete with 50’ of SOOW 16/3 AWG cord ending in a 5-15 straight blade plug that meets federal specification JC-580A. These particular units also come standard with an 1523 explosion proof straight blade plug. The plug is Class 1, Division 1 & 2 and Class 2, Division 1 & 2 rated. In order to complete the seal and preserve the plugs` explosion proof approval, the operator must connect the plug to a matching explosion proof outlet receptacle. Although this plug will work with a standard outlet, connecting to a regular 120VAC outlet renders the plugs` explosion proof rating useless and should only be done when connecting the light outside of the explosion proof environment.Click Photos to Enlarge 5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug Made in USA QualityLamp Features1. Federal Spec JC-580A Cord.2. Indoor or outdoor use.3. 35 amp, 1-4 conductors 600 Volt, 5-12 conductors 250 Volt.4. Rugged fabricated steel and cast aluminum construction.5. Gray epoxy finish on steel parts.6. UL Listed 508 table 36.1 (3 and 4 conductor units with cable only) 7. Conforms to NEMA 9 and NEMA 4 (IP56) standards8. SOOW cable.9. 15 Amp, 5-15 Explosion Proof Plug9. 4-roller adjustable cable guide and Ball Stop5 watt fluorescent light produces 400 lumensNon-sparking aluminum housingMolded rubber bumper guardsAnnealed glass tube shields prevent shatteringIntegrated lamp shock absorbers prevent drop damage to bulbsSwivel hook for hanging and hands free operationSOOW CordSpecifications / Additional Information EPL-FL26-LED-50-1523 Work LightF.M. RatingsFM Listing: United States Class 1, Division 1 for Groups C, D Lamp Type: LEDClass II, Division 1 Groups E, F, G Dimensions: L-14.5 " Dia-3.5"FM Listed JC-580A Cord Voltage: Stnd-120V-60hz Optional-120 Volts, 50 Hz and 220 volts, 50 HzClass III, Division 1Total Watts: 5 WattsNEMA 4 Total Lumens: 400FM Listed JC-580A Cord Luminous Efficacy: 80 Lm/WLamp Life: 50,000+ HoursColor Temp: 5600KLux At Lens: 48,900 Mounting: Aluminum Swivel HookSpecial Orders- RequirementsWiring: 50` 16/3 SOOW w/ Straight Blad PlugContact us for special requirements Cord Cap: 5-15 Straight Blade Plug, 5-20 Straight Blade Plug, 6-20 Straight Blade PlugToll Free: 888-325-4448Warranty: Yes - 3 YearsIntl: 1-903-270-1187 F.M. Approval: U.S Certificate E-mail: [email protected] Scroll Down to Purchase-