Larson Electronics Explosion Proof Compact LED Handlamp - Class I, Div. I - 25' SOOW Cord - 5 Watt LED - 400 Lumen

Made in the USAThe Larson Electronics EPL-FL26-LED-25 Compact Hazardous Location LED Work light is F.M. approved Class 1 Division1 Groups C and D, FM 508 listed, and is ideal for close quarter work and inspection activities in hazardous locations requiring explosion proof protection.This 5 watt explosion proof LED handlamp from Larson Electronics produces 400 lumens of pure LED illumination and comes complete with 25 feet of explosion proof cord. The EPL-FL26-LED-25 LED drop light`s housing is constructed of non sparking aluminum with molded bumper guards, an annealed glass tube shield and integral lamp shock absorbers. This hazardous location hand lamp is designed to Article 500 of the National Electrical Code and is Class 1, Division 1 and Class 2 Division 1 hazardous location environment approved. This explosion proof LED hand lamp can be installed and used within the hazardous location area making it ideal for hazardous work areas where a ready source of easily managed lighting is desired.This particular unit`s internal LED circuitry automatically senses and adjusts the incoming current to the correct level, allowing the unit to run off a variety of voltages ranging from 120 - 277VAC. The lamp assembly contains 24 individual LED diodes that produce an exceptionally bright output, creating three times as much light as its fluorescent counterparts. The Kelvin temperature color on this unit is 5600K and the rated lifespan of the LEDs lamp assembly is approximately 50,000 hours. EPL-FL26-100 fluorescent hand lamp illuminating a closed warehouse. EPL-FL26-LED-25`s output, more than triple the amount of it`s fluorescent counterpart. This 5 watt LED light is suitable for use in areas where petrochemical vapors and various dusts are present and projects 400 lumens of light, roughly equivalent to a 150 watt incandescent bulb as estimated by Sylvania. This unit is approximately 287% brighter than it`s fluorescent counterpart, nearly tripling the output with use of a low wattage, low amp draw LED light emitter. LED lights are popular in paint prep, painting, and post-paint inspection operations due to the even, pure, white color light produced.Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These light towers can operate on current ranging from 120 to 277V AC or 11 to 25V AC/DC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V RatedL5-15 Twist Lock Plug15 Amp / 125V RatedL6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail WiresWiring and Plug: This vehicle mounted LED flood lighting system is equipped with 100 foot of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.Incandescent lights tend to create yellowish, shadowy light that confuses the eye and makes it difficult to examine a work area with consistency. The light output, color, and evenness of coverage make LED lights popular for a wide variety of close quarter work and inspection activities. This unit is rated Class 1, Division 1 and is complete with 25` of 16/3 chemical and abrasion resistant SOOW cord is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 straight blade plug for 110V wall outlets with ground, NEMA L5-15 twist lock plug for 125V twist lock outlets, NEMA L6-15 twist lock plug for 240V twist lock outlets, BS1363 3-blade plug for United Kingdom outlets, and a two pin Schuko plug for European outlets. This explosion proof fluorescent hand light comes standard with 120 Volts, 60 Hz for US voltages but is also available in 120 Volts, 50 Hz (Mexico) and 220 volts, 50 Hz for international usage.Made in USA QualityLamp Features1. 25 Feet SOOW Cord.2. Indoor or outdoor use.3. Multi-Voltage 120 - 277VAC Capability.4. Rugged Aluminum and Rubber Lamp Bumper Construction.5. High Visibility Yellow Colors.6. FM Listed Explosion Proof Class 1 Division 17. Conforms to NEMA 4 Standards8. Vibration/Impact Resistant LED Lamp Assembly.9. 50,000 Hour LED Lamp Life5 watt fluorescent light produces 400 lumensNon-sparking aluminum housingMolded rubber bumper guardsAnnealed glass tube shields prevent shatteringIntegrated lamp shock absorbers prevent drop damage to bulbsSwivel hook for hanging and hands free operationExplosion proof cord Specifications / Additional Information EPL-FL26-LED-25 Work LightF.M. RatingsFM Listing: United States Class 1, Division 1 for Groups C, D Lamp Type: LEDClass II, Division 1 Groups E, F, G Dimensions: L-14.5 " Dia-3.5"FM Listed JC-580A Cord Voltage: Stnd-120V-60hz Optional-120 Volts, 50 Hz and 220 volts, 50 HzClass III, Division 1Total Watts: 5 WattsNEMA 4 Total Lumens: 400Luminous Efficacy: 80 Lm/WLamp Life: 50,000+ HoursColor Temp: 5600KLux At Lens: 48,900 Mounting: Aluminum Swivel HookSpecial Orders- RequirementsWiring: 25` 16/3 SOOW w/ Cord CapContact us for special requirements Cord Cap: 5-15, L5-15, L6-15, BS1363, Schuko, or PigtailToll Free: 888-325-4448Warranty: Yes - 3 YearsIntl: 1-903-270-1187 F.M. Approval: U.S Certificate E-mail: [email protected] Scroll Down to Purchase-