Larson Electronics 70W LED Light Pole - Adjustable Trunnion Light - 3' to 8.5' Adjustable - 9-32VDC - Flat Base Mount

(No reviews yet) Write a Review
0.00 LBS
Calculated at Checkout
Adding to cart… The item has been added
The TPM-BM-LED-GL4421-1224 from Larson Electronics is a Telescoping Flat Base Mount LED Light Pole that can be mounted to any flat surface to allow operators to elevate the included high intensity LED flood light and adjust its height from 3 feet to 8.5 feet. Designed to be mounted to flat surfaces, such as truck beds, trailers or bumpers, via a 4 hole mounting plate, this telescoping light pole can be adjusted to various heights and locked into position as well as collapsed and removed from the mounting bracket for stowing. The LED light head is mounted to a trunnion bracket, allowing for vertical tilt before or after pole height has been set. The TPM-BM-LED-GL4421-1224 is a permanent flat base mount telescoping light pole that allows operators to elevate one of our high intensity GL-4421 LED flood lights and adjust the height from 3 feet to 8.5 feet. Designed to be mounted to flat surfaces via a 4 hole mounting plate, this telescoping light pole can be adjusted to various heights and locked into position as well as collapsed and removed from the mounting bracket for stowing. The flat mount base plate has a 4" outside diameter and measures 12" in height. Two T-handle screws secure the light pole into the mounting base once is has been attached to the desired surface via four anchor bolts (not included) put through the four predrilled holes on the mounting plate. This adjustable telescoping pole is designed to be mounted to any flat surface via an included 4" OD flat base mounting plate with four predrilled mounting holes. Users can simply attach the mounting plate to the desired flat surface and then slip the pole into the bracket and lock it into place via the two T-handle screws. Once positioned, the aluminum pole can be collapsed to 3 feet and extended to 8.5 feet. The top of the pole is fitted with an aluminum mounting plate holding a single Gl-4421 LED flood lights which produce a total of 6,000 lumens of intense light output. This design is ideal for mounting to truck and utility beds, trailers, utility buckets, bumpers, concrete, and any other flat surfaces where temporary lighting may be needed. This adjustable telescoping light system includes one 70 watt GL-4421 trunnion mount LED flood light which produces a total of 6,000 lumens of light output at 5.83 amps on a 12 volt electrical system. The lamp are IP67 rated waterproof and can be adjusted independently of each other for maximum area coverage. These lights are universal voltage and can be operated with voltages ranging from 9 to 32 volts DC, making them ideal for connecting to power from vehicles and boats. These light bars contain eighteen CREE¨ 4 watt LEDs producing 334 lumens each paired with high purity optics to produce a 35 degree beam spread to provide more light over a larger area nearer the fixture, making flood light towers ideal for use as work and area lights. These LED light are waterproof to 1 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. The adjustable pole mount features a pneumatic braking system that prevents unexpected or sudden collapse of the pole. If the pole is loaded is fully extended for instance and the operator inadvertently releases the locking tabs, the pole will simple ease down gently rather than suddenly collapse. This is a great feature when you`d like the added security of knowing there is no chance of serious damage should the pole be released. A separate tube for wiring runs along side the pneumatic pole. This adjustable mounting pole is ideal for boats as operators can mount this on any flat surface near the console and elevate the lights up to illuminate the boat and the surrounding area. By elevating the lights this high, they can eliminate casting and glare while better illuminating a larger area. Essentially, this adjustable pole provides the benefits of having a mast mounted light without actually having a mast. Once the lights are no longer needed, the pole can be collapse down and the lights secured before getting underway. Similarly, these poles are ideal for attaching lights to trailers. Operators can park the trailer, extend the lights to their maximum height, and illuminate a large area around the trailer. Once finished with their use, the pole is simply collapsed and the lights stowed for travel. This is a highly convenient setup for those who manage events and gatherings where trailers are used as portable operations areas. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information TPM-BM-LED-GL4421-1224 LED Light Pole w/ Flat Base Mount Features Pole Materials: Aluminum Pole Adjustable from 3 to 8.5 Feet Pole Dimensions: 3` to 8.5` Extendable Pole Pneumatic Release Brake Pole Mounting: Predrilled 4 Hole Flat Base Mounting Plate High Output LED Light Bar Pole Features: Slow Release Pneumatic Braking Multi-Voltage 9-32V DC Watts: 70 IP67 Waterproof LED Lights Voltage: 9-32V DC Flat Base Mounting Plate Included Lighting Configuration: 35¡ Flood Wiring: Deutsch IPD / LADD DT04-2P connector Amps: 5.83A @ 12V, 2.92A @ 24V Special Orders- Requirements LED Light Color: 6000K Contact us for special requirements LED Life Expectancy: 50,000 Hours Toll Free: 888-325-4448 Lamp Housing Colors: Black Total Lumens: 6,000 E-mail: [email protected] Scroll down to purchase