Image coming soon

Larson Electronics 60 Watts Weatherproof Light Pole Light - Horizontal Tenon Mount - IP65 - 0-10V Dimmable

(No reviews yet) Write a Review
0.00 LBS
Calculated at Checkout
Adding to cart… The item has been added
The LEDPLL-600W-HTNM-D-V2 Larson Electronics General Area 0-10V Dimmable LED Light with Horizontal Tenon Mount is a robust, versatile fixture suitable for a wide range of commercial spaces, including parking lots, roadways, outdoor venues and permanent work sites. The 60-watt unit operates on 120-277VAC, 347VAC and 480VAC with an operating lifespan of over 70,000+ hours. For superior durability, the fixture features a die-cast aluminum housing finished in polyester powder coat paint in either Black, Silver or Brown. Buyers may choose from several beam configurations (see below for selection). Features: The LEDPLL-600W-HTNM-D-V2 dimmable LED light is designed to meet the standards of today’s commercial businesses and projects. LED drivers and electrical components found in this luminary are hard mounted to the die-cast housing for optimal heat sinking and operating efficiency. It is compatible with the following input voltages: 120-277VAC, 347VAC and 480VAC. This 60-watt unit emits light at 11,500 lumens with a 115 lumens-per-watt ratio (CRI: =Ra 80). Color temperature settings (3000K, 4000K, 5000K and 6000K) are available, as well as 1-10VDC, PWM Dimming or Daylight Sensor for occupancy control. With a lifespan of over 70,000+ hours, the General Area LED Light features an active heat dissipating system that offers even heat distribution and lower temperature rise. The aluminum fins design also helps to disperse heat and promote a long, reliable LED life. This light comes with the following beam configuration options: 10¡, 30¡, 60¡, 110¡, Down Light, Type II M, Type III M, Type IV M, Type V S, Tunnel or Wide Flood. When it comes to mounting, this LED light uses horizontal tenon mounting. The horizontal tenon mount is designed to mount on a 2" (51mm) IP, 2.375" (60mm) O.D. horizontal tenon and/or a 1.25" (32mm) IP, 1.66" (42mm) O.D. horizontal tenon (minimum 8" [203mm] in length) and is adjustable +/- 5 ¡ to allow for luminaire leveling (two axis T-level included)The cast aluminum arm includes bolt guides, allowing for easy positioning of the fixture during installation to pole. Standard single carton packaging of housing, square pole arm and round pole adapter provide contractor-friendly installation. During operation, the outdoor fixture is suitable for ambient environments, ranging between -25¡C ~ +60¡C. The LEDPLL-600W-HTNM-D-V2 is constructed from one-piece, die-cast aluminum housing with high quality outdoor powder coating finish and shock-resistant lenses. This weatherproof fixture’s housing is sealed from moisture and harmful environmental contaminants, making it extremely resilient against rain, fade and wear. The luminary is ETL listed for wet locations, IP65 rated and ROHS compliant. Inside the fixture, the LEDs comply with IESNA LM-79 and LM-80 standards. This LED light fixture features 0-10V dimming capabilities. This gives operators the ability to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Applications: Parking lots, roadways, street lighting, car dealerships, stadium, tunnel lighting, outdoor sports areas, campuses, parks, advertising light, commercial spaces, permanent work sites, concert venues and other applications that require brilliant illumination for extended periods of time. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. 60 Watts - Dimmable General Area LED Light Quick Summary Lamp Type: LED General Area Light Weatherproof Input Voltage: 120-277VAC, 347VAC, 480VAC, 12-24VAC/DC IP65 Rated Total Watts: 60 Watts ETL Listed for Wet Locations Light Output: 11,500 Lumens ROHS Compliant Light Efficacy: 115 lm/W IESNA LM-79 and LM-80 Standards Color Temp: 3000K, 4000K, 5000K 0-10V Dimmable CRI: =Ra 80 Beam Options: 10¡, 30¡, 60¡, 110¡, Down Light, Type II M, Type III M, Type IV M, Type V S, Tunnel, Wide Flood Expected Lifespan: 70,000+ Hours Operating Temp Range: -25¡C ~ +60¡C Special Orders- Requirements Occupancy Control: 1-10VDC, PWM Dimming Control or Daylight Sensor Control Contact us for special requirements Housing Material: Die-cast Aluminum w/ Polyester Powder Coat Paint Toll Free: 888-325-4448 Mount Options: Horizontal Tenon Mount Dimensions: 18.15” x 17.99” x 3.07” Fax: 1-903-498-3364 Warranty: YES *3 Years E-mail: [email protected] Scroll Down to Purchase-