Larson Electronics 30 KVA Power Distribution - 240V Delta to 208Y/120V 3PH - (1 Set) Female Cam-locks Secondary

Made in Texas The Larson Electronics MPD-240D-30KVA-208Y.120-100MLO-CMLK power distribution substation converts 240V three phase electrical current into 208Y/120V three phase. This unit provides operators the ability to safely tap into and distribute 240VAC power from a variety of sources including generators and direct grid power. Note: A customer-provided 100-amp primary disconnect or circuit breaker must be used for protection with this power distribution system. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use: The MPD-240D-30KVA-208Y.120-100MLO-CMLK portable power distribution system gives operators the ability to power their 208Y/120V equipment from a single system. On the primary side, operators connect 240 volt using 75` of #4 Type W cable to a customer-provided 100A max fused disconnect. On the secondary side, operators connect to one set of female cam-locks (black, red, blue, white, green) for 208Y/120V equipment. Operation: A 75` #4 Type W cable brings 240V three phase power to a customer-provided primary disconnect and passes power through to the transformer. The NEMA 3R 30KVA transformer converts 240V three phase power to 208Y/120V three phase and passes the current to the secondary side. The secondary side of the transformer feeds a NEMA 3R 100-amp, 208Y/120V three phase secondary main lug only panel. This secondary side contains one, 50-amp, 3-pole, 250V breaker protecting one set of 150-amp, 600V-rated female cam-locks (black, red, blue, white, green). Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-240D-30KVA-208Y.120-100MLO-CMLK Power Distribution Line-In Cord: 75` #4 3C4W Type W Cable Max Primary (PDU) OCP: 100A @ 240V Line-In Cord Cap: Customer Provided Max Secondary (PDU) Output: 83.3A @ 208V Primary Voltage: 240V 3PH UL 1640 Portable Power-Distribution Equipment Primary Disconnect: Customer Provided NEMA 3R Indoor / Outdoor Use Primary Panel: - N/A Made in the USA Primary Breakers: - N/A Customer-Provided Primary Disconnect Primary Receptacles: - N/A Primary Protection: Customer Provided Fused Disconnect Transformer: 30KVA 240V to 208Y/120V 3PH 60Hz N3R Secondary Voltage: 208Y/120V 3PH Secondary Disconnect: - N/A Secondary Panel: 208Y/120V 3PH 100A MLO N3R Secondary Breakers: (1) 50A 3P [250V] Secondary Receptacles: (1 Set of Female Cam-locks) 150A Black, Red, Blue White Green [600V Rated] Secondary Protection: - Circuit Breakers Special Orders- Requirements Form Factor: Square tube frame, skid pockets, top pick eye & locking 8” locking casters Contact us for special requirements Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 34” X 44” X 58” Intl: 1-214-616-6180 Weight: 600 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase