Larson Electronics 260W 42" High Intensity LED Light Bar - 9-46VDC - 22,360 Lumens - (4) 200 lb Magnetic Bases

Larson Electronics

(No reviews yet) Write a Review
SKU:
LEDP10W-260E-M
Weight:
0.00 LBS
Call for price
Buy American CompliantThe LEDP10W-260E-M from Larson Electronics is a LED Magnetic Mount Light Bar that is ideal for a wide variety of uses including equipment, vehicle, military, law enforcement and industrial manufacturing applications. This magnetic LED light bar features 22,360 lumen light output with low voltage and amp draw, a 50,000 hour rated service life and 9 to 46 volt compatibility provides operators with a versatile and powerful LED lighting solution. The LEDP10W-260E-M features four 200 lb magnetic bases spaced along the bottom of the light bar for quick and secure mounting to flat magnetic surfaces.The 42" long LEDP10W-260E-M magnetic LED light bar from Larson Electronics produces 22,360 lumens of bright light while drawing only 260 watts @ 21.67 amps from a 12 volt electrical system. Twenty six CREE XLamp MC-E¨l; 10 watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam over 1,650 feet in length. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as work lights. This magnetic LED light bar is waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications.An integral Pulse Width Modulation controller, small profile, low power requirements, high durability and versatile mounting system makes these LED light emitters a superior lighting solution for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, offroading and commercial structure illumination. This photo shows an open field illuminated only by ambient light at approximately 9:00 P.M.This shows a slightly less powerful LEDP10W-260E-M illuminating the field in flood configuration. The 260E-M will produce a wider and longer beam and is ideal for work area illumination.This is a close up of the `Larson Electronics` sign. The output gets soft past the sign due to it`s flood configuration, yet the flood beam is still powerful up to 800`.LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to tap into a provided input wire with an external pulse generator and adjust the duty cycle of the current being applied to the LEDs. Thus you can connect an external dimmer, switch or pulse control and adjust the perceived output of the light, effectively causing the light to flash, dim or brighten to the desired levels. Additionally, this method of controlling light output results in a corresponding drop in amperage draw, so if the duty cycle is cut back to 50% there will be a matching 50% reduction in amperage draw. These units are also able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP10W series light bars can operate on current ranging from 9 to 46V DC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it. Duraiblity: As well as unparalleled heat control, the LEDP10W series of LED light bars from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp MC-E¨ LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use.Mounting: The LEDP10W-260E-M is a magnetic mount LED light bar and features four 200 lb magnetic bases that are spaced along the bottom of the light bar for maximum stability and simple installation on any flat magnetic surface. The magnetic mounting of the LEDP10W-260E-M increases the versatility of the light bar and allows for easy removal for storage when compared to permanent mount units.Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.LEDP10W-260E-M 40¡ Flood Beam(Opt) LEDP10W-260E-M 20¡ Wide Spot Beam(Stnd) CONDITIONS Vin min (V) = 9toff (us) = 2.9Vin nom (V) = 12R1 (kohm) = 50.2Vin max (V) = 50L1 (uH) = 3.0Vo min (V) = 6.5L-Pk (A) = 2.9Vo nom (V) = 6.8L-rms (A) = 2.9Vo max (V) = 7Ipk (A) = 2.5I-LED (A) = 2.2R2 (ohm) = 0.10Efficiency = .85I-FET (A) = 2.2fsw nom (kHz) = 150fs min (kHz) = 77Ts nom (us) = 6.666667 fs max (kHz) = 301Base frequency-= 36~37Khz @ 12VAmplitude of pulse width-= 27MsOutside: External dimmer-= 500Hz Inside : Current sensing from- 77KHz at 12V to 300KHz at 50V Specifications / Additional Information LEDP10W-260E-M LED Light BarInternal LED Driver FeaturesLamp Type: CREE XLamp MC-E¨ LEDFast Average Current ControlDimensions: 42"L x 2.5"H x 3.5"D Programmable Off-time Switching Weight: 18.6 lbsLinear Dimming Input Watts: 260PWM Dimming Input Led Drive %: 90%Short Protection w/ Skip ModeVoltage: 9-46V DCAmbient Op Temp -40¡C to +125¡CLighting Configuration: 20¡ Spot or 40¡ Flood Pin-compatible with the HV9910BMounting: Flat Surface or Tube - AdjustableView Avg-Mode Driver Control PDFWiring: Deutsch IPD / LADD DT04-2P connectorCE Certified Amps: 21.67 (on 12 volts) 10.83 amps (on 24 volts) Lumens: 22,360 LED Light Color: 6000KLED Life Expectancy: 50,000 hoursOptics Efficiency: 90%Materials: Aluminum Housing, Polycarbonate LensHousing Colors: Black or WhiteSpecial Orders- RequirementsFlood Beam: Lux @ 1 meter= 35,000 @ 3 meters= 7,500 Contact us for special requirements Spot Beam: Lux @ 1 meter= 72,000 @ 3 meters= 13,750Toll Free: 1-800-369-6671Mounting: (4) 200 lb Magnetic BasesIntl: 1-903-270-1187Warranty: YES - 3 Years*E-mail:[email protected] Scroll Down to Purchase-

Reviews