Larson Electronics 2500kVA Padmount Transformer - 12470GRDY/7200 Grounded Wye Primary - 480GRDY/277 Grnd. Wye Secondary

The MT-PML-3P-12470GRDY.7200-2500KVA-480GRDY.277-N3R 12470GRDY/7200 3 Phase Energy Efficient Pad Mount Dead Front Loop Feed Transformer from Larson Electronics is powerful, reliable and designed with the environment in mind. Suitable for both indoor and outdoor applications, the MT-PML-3P-12470GRDY.7200-2500KVA-480GRDY.277-N3R provides increased reliablity and protection against critical equipment failures. The lower operating costs, lower heat emissions and lower cost of ownership make this transformer ideal for a wide range of applications and businesses. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Transformer Features: With a transformer rating of 2500kVA, the MT-PML-3P-12470GRDY.7200-2500KVA-480GRDY.277-N3R transformer is a three phase unit with a primary voltage of 12470GRDY/7200 Grounded Wye. It also provides a secondary voltage of 480GRDY/277 Grounded Wye. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. The MT-PML-3P-12470GRDY.7200-2500KVA-480GRDY.277-N3R is a grounded wye connection transformer and therefore must be connected phase-to-ground on a grounded wye system. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The Standard NEMA Type 3R enclosure makes the unit suitable for both indoor and outdoor applications and it can be pad mounted. The unit also features non-PCB mineral oil cooling, a 65¡C temperature rise and is rated IP24. The MT-PML-3P-12470GRDY.7200-2500KVA-480GRDY.277-N3R is designed so that no excess oil heating occurs from unbalanced loads or phase loss on the primary side. Benefits: The MT-PML-3P-12470GRDY.7200-2500KVA-480GRDY.277-N3R pad mount dead front loop feed transformer offers many benefits to the consumer. Precision cut aluminum transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. This transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Nameplate/Stickers: The MT-PML-3P-12470GRDY.7200-2500KVA-480GRDY.277-N3R is equipped with a nameplate located within the low voltage side of the cabinet. The included nameplate complies with ANSI Standard C57.12.07 and lists the following information: high voltage current, low voltage current, kVA rating, transformer weight, date of manufacture, serial number, oil type used, and impedance. This nameplate also states non-PCB. The MT-PML-3P-12470GRDY.7200-2500KVA-208GRDY.120 also includes NEMA Standard 260, Figure 2 safety labels. Applications: General purposes. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MT-PML-3P-12470GRDY.7200-2500KVA-480GRDY.277-N3R Pad Mount Transformer Ratings Phase: Three Phase Listed for United States and Canada Frequency: 60Hz ONAN Cooling Class kVA: 2500 IP24 Rated Primary Voltage: 12470GRDY/7200 Grounded Wye Mineral Oil Filled Primary Connection: Grounded Wye Dead Front Primary kV Class: 15kV Loop Feed Primary BIL: 95kV ANSI Standard C57.12.70 Primary FCAN: 2 x 2.5% Primary FCBN: 2 x 2.5% Secondary Voltage: 480GRDY/277 Grounded Wye Secondary Connection: Grounded Wye Secondary kV Class: 1.2kV Secondary BIL: 30kV Secondary Phase Angle: 0¡ Primary Termination (NPL): (6) 200 Amp Bushing Wells w/ (6) Screw-Out Loadbreak Inserts Secondary Termination (NPL): 12 Hole Supported Spade Bushings Accessories: Non-PCB Label Accessories: 1" Filling Provision Accessories: 1" Drain Valve w/ Sampler Accessories: Liquid Level Indicator Accessories: Pressure Relief Valve Accessories: Grounding Lugs Tap Changer: Tap Changer Handle in Primary Compartment Winding Material: Aluminum Cooling Class: ONAN Insulating Fluid: Non-PCB Mineral Oil Temperature Rise: 65¡C Impedance (Std): 1.5% - 5.75% Sound Level: NEMA TR1 Standard Enclosure Features: Welded Cover w/ Bolted, Tamper Resistant Handhole Enclosure Features: ANSI Compliant Lifting Lugs Enclosure Features: Jacking Provisions Enclosure Features: Rolling Provisions Enclosure Features: Steel HV-LV Barrier Enclosure Features: Provisions For Arresters Enclosure Features: H0X0 Bushing w/ Removable Ground Strap Tank Grounding Provisions: (2) 1/2 - 13 UNC Tapped Holes 1/2" Deep Nameplate: EPS Standard Located in LV Compartment Cabinet Hardware: Corrosion Resistant Penta-Head Locking Bolts; 1/2" Shackles for Padlocks Special Orders- Requirements Finish: Munsell Green (Munsell 7GY 3.29/1.5) Topcoat Contact us for special requirements Dimensions: - Toll Free: 888-325-4448 Weight: - Intl: 1-214-616-6180 Mounting: Pad Mount E-mail: [email protected] -Scroll Down to Purchase-