Larson Electronics 24' Five Stage Light Mast on 10' Single Axle Trailer - 8' to 24 - 16" Wheels - Mount Lights, Cameras

Made in the USA The Larson Electronics LM-24-5S-10TLR trailer mounted fold over 5-stage light mast provides a safe and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations up to twenty-four feet. This light tower folds over for easy transportation, features a rotating boom that allows for 360¡ of rotation, and a removable mast head for storing mounted equipment when not in use. The entire assembly is mounted onto a 10` single axle trailer, allowing operators to transport this fold over boom from location to location. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* This telescoping five stage steel light mast from Larson Electronics’ is designed to allow operators to quickly and safely deploy lighting, cameras, and other electrical equipment in locations where this equipment must be elevated to heights up to 24` for effective coverage. This light boom can be extended to 24` above the trailer floor for maximum area coverage, and collapsed to 8` for applications where a footprint smaller is required.The tower is constructed of square steel tubing with a base section 5.92` in length and 6" by 6" by 3/16" thick, lower section 6.04` in length and 5" by 5" by 3/16" thick, middle section 6.19` in length and 4" by 4" by 1/8" thick, upper section 6.34` in length and 3" by 3" by 1/8" thick, and an top section 6.5` in length and 2" by 2" by 1/8" thick. ach section has a 1` overlap. The mast is elevated using an included 2,500 lbs hand winch with 3/16" cable and extended to its full height using a second 2,500 lbs hand winch. The mast is mounted at the front of a 10` trailer and the mast head hangs above the back of the trailer. 44" Mast Head for mounting lights and equipment 13" by 15" by 1/4" thick mounting base Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for standard payloads up to 150 lbs. When elevated to its full upright position, the mast can be rotated a full 360¡. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different positions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand. The LM series of towers are powder coated with glossy blue finish for corrosion resistances and aesthetics. This light mast is mounted to a 14` by 6`, single axle trailer via six 1/2" anchor bolts. The two wheel trailer is equipped with 3,5000 lbs leaf springs and 16" trailer tires. The trailer can support and haul an additional 2,000 lbs of equipment. A standard 2" ball coupling, two standard safety chains, and 4-pin flat trailer plug allow for easy hookup and towing. The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. Four 1,000 lbs hand crank leveling jacks are used for leveling. The jacks can be leveled by hand crank or attachment provided for power drills. These outriggers can be extended 2` out from the side of the trailer for added stability. When lowered to 13.5`, the mast can withstand winds up to 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised. Retractable outriggers with 1,000 lb manual crank jacks and tail lights. Manual 1,000 lb hand crank winch for elevating and folding over the light mast on the LM-24-5S-10TLR. Mast support bracket for securing the mast boom in the fold-over position during transportation. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge The LM-24-5S-10TLR fitted with four HID-22-SL-REM 1000 Watt Metal Halide Light Fixtures Ready to Ship The LM-24-5S-10TLR fitted with four EPL-HB-150LED-RT 150 Watt Explosion Proof LED Light Fixtures Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge This light tower assembly weighs approximately 1200 lbs, can easily support and lift 150 lbs fixtures. The entire tower assembly is shipped via common freight carrier or flatbed. Larson Electronics can custom tailor these units to the customer’s requirements with longer sections and larger mounting plates. For example, the LM-40-4S is another model that reaches to a length of 40`, with base section 11.25` in length, lower section 11.25` in length, an upper section 11.25` in length, and a top section 11.75` in length. Larson Electronics can custom build these towers to meet your overall and collapsed height requirements. We also offer a choice of either the manual or electric winches, finishing, and equipped light heads. Winch options include 1,000 lbs hand winches (included standard) or optional electric winches for standard light towers, and heavy duty winches and hoists for high payload units. Powder coating color can be customized (the standard mast is gloss blue). Mast location on the trailer bed can be tongue mounted, front of the trailer bed, or center of the trailer bed. These towers can be fitted with Larson Electronics line of high output light heads, or customize the mast head to meet the mounting requirements for your equipment. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W HID-22-SL-REM or 1500W HID-22-15M-SL-REM Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the LED10WSA-160, LED10WSA-320, LEDP5W-30, LEDP5W-60, and GAU-HB-160LED. Specifications / Additional Information LM-24-5S-10TLR Trailer Mounted 3-Stage Light Tower Quick Summary Light Mast Specs 8` to 24` Light Mast Tower Length: 8` to 24` Steel Construction Mast Head Length: 44" Power Coated Finish Mast Stages: 5 Removable Mast Head Capacity: 150 lbs (4) 1,000lb Retractable Outriggers Materials: Steel 125 mph Wind Resistance Finish: Powder Coated - Gloss Blue Manual or Optional Electric Operation Operation: (2) 2,500lbs Hand Winches, Electric Optional Cable: 3/16" Galvanized Aircraft Cable Trailer Specs Materials: Steel Trailer Dimensions: 10`-L x 6`-W trailer bed Hitch: 2" Ball Coupler Wiring: 4-Pin Flat Axle: 3,500lb Suspension: 3,500 Lb 4-Leaf Double Eye Springs Outriggers: (4) 1,000 Manual Crack Leveling Jacks - Retractable Wheels: (2) 16" 5x4.5 Steel Rims Tires: ST205/75/D16 H188 Special Orders- Requirements Weight: +-1200 lbs Contact us for special requirements Shipping: Common Freight Phone: 1-214-616-6180 Shipping Dimensions: ~11`-L x 8`-W x 8`-H Toll Free: 888-325-4448 Shipping Weight: +-1700 lbs Fax: 1-903-498-3364 Options: Length- Mounting-Fixtures/ Call Us for Special Requirements E-mail: [email protected] The customer ships the failed light mast to Larson Electronics at their expense. If the failure is a manufacturer defect, we will repair and/or replace the unit.