Larson Electronics 160W Low Profile Hazardous Location LED Light - C1D2/C2D2 - (4) 4' Lamps - Paint Spray Booth Rated

(No reviews yet) Write a Review
0.00 LBS
Calculated at Checkout
Adding to cart… The item has been added
The Larson Electronics HALD-48-4L-ITG-LED Low Profile Hazardous Location LED Light provides a thin fixture profile that allows maximum use of available space. Equipped with four, 4-foot LED lamps, this fixture provides 16,000 lumens of white light during operation. Protected by a 20-gauge steel frame, the LED light designed for paint spray booths and locations where flammable chemical/petrochemical vapors are present. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM*** The HALD-48-4L-ITG-LED is a 4-foot long, 4-lamp LED light that is ideal for use in paint spray booths and hazardous locations where space for lighting fixtures is limited. This 160-watt fixture is T3C temperature rated, comes standard with high output LED bulbs and features an integrated magnetic paint spray system cutoff switch that is activated when this fixture`s lamp door is opened. During use, the unit offers 16,000 lumens of output at a rate of 4,000 lumens per LED lamp. This fixture is universal-voltage capable and is approved for use in paint spray booths. The HALD-48-4L-ITG-LED provides operators in hazardous locations with a reliable and durable, low profile lighting solution that provides added safety through the inclusion of an integral paint spray cutoff switch that shuts down paint spray systems when the fixture is opened. The lamps are protected by a steel framed, hinged, 3/16" thick glass door that provides direct front access to the four lamps. The lamp housing is only 2 and 1/4 inches thick, designed for recessed mounting, constructed of 20-gauge steel and coated with a baked on white enamel finish. We have eliminated the ballast box normally associated with explosion proof fluorescent fixtures which reduces overall weight and overall complexity of installation. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified. Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting. NOTE: The integral momentary cutoff switch included with this fixture is activated when the lamp door is opened. This switch is not intended to directly control light operation and requires the addition of a separate solid state relay which is then used to control actual system operation. The cutoff switch acts only as an activator for an external relay and is rated for 10 watts at a maximum of 300V AC. Overloading the switch through improper connection will result in switch failure. It is recommenced that a certified electrician make any installations and reviews of relay connections intended to take advantage of this light`s cutoff switch. The HALD-48-4L-ITG-LED is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC, 50/60hz without any modifications. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power. Energy Consumption Comparison T5HO T8 LED Wattage 216 watts 128 watts 112 watts Amp Draw @ 120V AC 1.80 amps 1.07 amps 0.93 amps Amp Draw @ 220V AC 0.98 amps 0.59 amps 0.51 amps Amp Draw @ 240V AC 0.90 amps 0.54 amps 0.47 amps Amp Draw @ 277V AC 0.78 amps 0.47 amps 0.40 amps Amp Draw @ 12V DC 18 amps 10.67 amps 9.33 amps Amp Draw @ 24V DC 9 amps 5.34 amps 4.67 amps Lamp Life Expectancy 20,000 hours 24,000 hours 50,000 hours Operation cost per year(12hs/day @ 12c/kWh) $113.53 $67.28 $58.86 Wiring: Wiring connections for this hazardous location unit are passed through a 1/2" NPT threaded hub. Mounting: This fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture`s glass door frame will extend 3/8” into the spray booth. Applications: Paint spray booths and enclosed spaces where flammable chemical/petrochemical vapors are present. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information HALD-48-4L-ITG-LED - Paint Spray Booth LED 4-Lamp Fixture Ratings/Approvals Listing: United States, Canada Class I, Division 2 Groups A,B,C,D Lamp Technology: LED Class II, Division 2 Groups F,G Dimensions: W-15 3/4” L-50 7/8" D-2 1/4" T3C (160¡C) Weight: - Lamp Quantity: 4 Voltage: Universal 120-277V AC 50/60 Hz or 11-25V AC/DC Frequency: 50/60 Hz Total Watts: 160W (40W per Lamp) Total Lumens: 16,000 lms (4,000 lms per Lamp) Luminous Efficacy: 125 Lm/W Lamp Life: 50,000+ Hours Color Temp: 5600K, 4500K or 3000K Color Rendering Index: >80 CRI Lamp Type: - Lamp Base: - Replacement Lamp: - Beam Angle: 150¡ Lighting Configuration: Flood Beam Cutoff Switch: 10W at 300V AC (Max) Momentary Contact Switch Power Efficiency: 90% Power Factor: >0.95 Amperage: 1.33A @ 120V AC, 0.76A @ 208V AC, 0.72A @ 220V AC, 0.66A @ 240V AC, 0.57A @ 277V AC Ambient Operating Temp Range: -30¡ C to +85¡C Maximum Case Temp: +90¡C Temp Rating: T3C Special Orders- Requirements Housing Material: 20ga Steel Frame Contact us for special requirements Hardware/Hub Material: - Toll Free: 888-325-4448 Lens Material: 3/16" Tempered Glass Intl: +01-903-498-3364 Mounting: Recessed Panel Mounting Fax: 1-903-498-3364 Wiring Hub: 1/2" Threaded NPT E-mail: [email protected]