Larson Electronics 150W Marine Grade LED Light - 30 LEDs - 14,790 Lumens - 120-277V AC - Halide Equivalent

Larson Electronics

(No reviews yet) Write a Review
SKU:
LED-BL-150W-1227
Weight:
0.00 LBS
Call for price
Buy American Compliant The LED-BL-150W-1227 from Larson Electronics is a Marine Grade LED Light that offers high output from a compact form factor and is ideal for use in marine applications as well as for dock lights, boat lights and other locations that require a marine grade lighting solution. A 14,790 lumen output, 1.25 amp draw @ 120V, 50,000 hour service life and 120 to 277 volt AC compatibility provides mine operators with a rugged and powerful LED alternative to 400 watt metal halide lamps that uses little power and can withstand rugged use and abusive marine conditions. The LED-BL-150W-1227 marine grade lights are ideal replacements for fragile and hot running 400 watt metal halide lamps. They offer Pulse Width Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that makes these marine grade boating and dock LED lights a superior lighting solution for marine applications where power, reliability and durability is critical. The heavy duty marine grade design and high power of these LED lights also makes them suitable for a wide array of marine applications including but not limited to: boating, dock lights and other wet locations. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP5W-30 series light bars can operate on current ranging from 120 to 277VAC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it. Durability: As well as unparalleled heat control, the LED-BL-150W-1227 series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These marine grade units can withstand rapid temperature changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPG¨ LEDs help these units achieve 15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in marine applications such as on boats or as dock lighting where a lot of vibration, dust, dirt, dampness and wet working conditions are encountered. Mounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply loosens the thumb screws located on either side of the unit, moves it into the desired position, then retightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning. Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These marine grade LED lights can operate on current ranging from 120 to 277V AC. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This marine grade LED light fixture is equipped with 6 inches of 16/3 chemical and abrasion resistant SJTW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Specifications / Additional Information LED-BL-150W-1227 Marine Grade LED Light Ratings/Approvals Lamp Type: CREE XLamp-XPG¨ LED Automatic Current Sensing and Adjusting 120-277V AC Dimensions: 11.69"L x 7.54"H x 4.94"D Active Heat Management Weight: 11.02 Lbs UL1012 Compliant Voltage: 120-277V AC UL60950-1 Compliant Amps: 1.25 (on 120 Volts) Transformer cULus Rated Total Watts: 150 Total Lumens: 14,790 Luminous Efficacy: 98.6 Lm/W LED Lamp Life: 50,000+ Hours Color Temp: 5,000K Beam Angle: 25¡ Spot or 60¡ Flood Lighting Configuration: Spot or Flood Ambient Operating Temp: -40¡C to +80¡C Optics Efficiency: 90% Led Drive %: 90% LED Light Color: White Housing Colors: Black Materials: Aluminum Housing, Polycarbonate Lens Special Orders- Requirements Mounting: Flat Surface 360 Degree Adjustable Contact us for special requirements Wiring: 6" SJTW Cable Terminated w/ General Area Cord Cap Toll Free: 1-800-369-6671 Cord Cap: 5-15, L5-15, L6-15, BS1363, Schuko, or Pigtail Intl: 1-903-270-1187 Warranty: Yes - 3 Years E-mail: [email protected] Scroll Down to Purchase-

Reviews